30 Effects
Dave Smith Instruments
Clock Sync: On, Off—When a delay effect is chosen, this enables syncing
of the timed delay repeats (feedback) to the Arpeggiator, Sequencer, or MIDI
clock. When Sync is on, delay time provides the following values:
Value Delay Time
1 4 beats
2d 3 beats
2 2 beats
4t 1 beat
4d 1 1/2 beat
4 1 beat
8d 3/4 of 1 beat
8 1/2 of 1 beat
8t 1/2 of 1 beat
16d 3/8 of 1 beat
16 1/4 of 1 beat
Maximum delay time is 1 second. The combination of longer synced delay
times with slower tempos can result in delay times that would be greater than 1
second. When that happens, the delay time is divided by 2 until it no longer exceeds
the 1 second limit. For example, if the BPM is set to 60 and Delay Time is set to Half,
the expected delay time would be 2 seconds. The actual delay time will be 1 second
(i.e. 2 seconds divided by 2).
Parameter 1: Variable, depending on the effect—This knob adjusts
parameter 1 for the chosen effect. Each effect has two adjustable param-
eters, which differ depending on the effect.
Parameter 2:
Variable, depending on the effect—This knob adjusts
parameter 2 for the chosen effect. Each effect has two adjustable param-
eters, which differ depending on the effect.
To Next Page
Loading...
