David Clark dc onex - Page 9

C O M F O R T T E C H N O L O G Y
F E A T U R E S
WWW.DAVIDCLARK.COM 9
Bluetooth
®
Wireless Technology
Press and hold for 2 seconds to turn
on Bluetooth
®
Wireless Technology:
•Flashing Purple: Initializing/Mute
Disabled
•Flashing Green: On, Not
Connected
•Flashing Yellow: Pairing Mode
•Flashing Blue: Paired and
Connected/Mute ATC/Intercom
Enabled
To Pair:
•Turn Bluetooth
®
Wireless
Technology on (flashing green)
•Press Bluetooth
®
Wireless
Technology button to enter
pairing mode (flashing yellow)
•Search for devices from your
phone/device
•Select DC ONE-X and initiate
pairing on your device
•If prompted for PIN code,
enter 0 0 0 0
Control Module - Quick Reference Guide
Power
Press and hold for 2 seconds to turn
unit on or off:
• Solid Yellow: Initializing
• Flashing Green: On
• Flashing Red: On, Low Batteries
Power (LED 'Dark' Mode)
• First, press and hold Bluetooth
®
button, then press and hold the
Power button
• Power and Bluetooth
®
LED will turn
ON yellow
• Release the Power ON button
• Continue to hold Bluetooth
®
button
until yellow Power ON LED turns
OFF
• Release Bluetooth
®
button
• Control Module is now in 'Dark'
mode (no flashing Power LED).
Note that 'Low Batteries' red flashing LED
will still function in 'Dark' mode.
Volume Up/Down
• Adjust listen level volume up
or down
•Left/right adjustments are
independent
• Only usable when power is ON;
Levels default to max when unit
is OFF
Mono/Stereo
• Set per type of intercom/audio
panel (factory default is “Mono”)