To Next PageTo Next Page
Need help?Do you have a question about the Dawicontrol DC-2974 PCI and is the answer not in the manual?
General| Interface | PCI |
|---|---|
| Data Rate (Serial) | Up to 115.2 Kbps |
| Compatibility | PC |
| Interface Type | PCI |
| Operating System Support | Windows, Linux |
| Ports (Serial) | 2 |
Explains the function of Jumper J1 for enabling the ROM on the SCSI hostadapter.
Details the Jumper J2 settings for SCSI termination, including auto mode.
Guide to connecting up to seven SCSI devices, emphasizing unique SCSI-ID assignment.
Instructions for ensuring proper signal transfer via SCSI bus termination resistors.
Overview of the built-in SCSI interface in Windows 95/98/ME for driver adaptation.
Lists command-line switches for the DC2974.MPD driver for power saving and configuration.
Details on using Windows 2000/XP's SCSI interface and installing the DC2974.SYS driver.
Explains command-line switches for the DC2974.SYS driver in Windows 2000/XP for advanced settings.
Overview of Windows NT's SCSI interface and driver adaptation for the hostadapter.
Steps for installing the SCSI hostadapter during the Windows NT setup process.
Procedure for installing the SCSI hostadapter on an already configured Windows NT system.
Lists command-line switches for the DC2974.SYS driver on Windows NT for configuration.
