■ Tiller Adjustment
The tiller can be adjusted in to many different positions to suit each driver.
1. Loosen the lever to adjust the tiller to positions you want.
2. Once decide the position, tighten the lever to secure the tiller.
WARNING! Remove the key from the key
switch before adjusting the tiller or the seat.
Never attempt to adjust the tiller or the seat
while the Scooter is in motion.
WARNING! Prior to operating the scooter,
push and pull on the tiller to ensure that the
angle adjustment mechanism is secure.
Inspect the tiller adjustment knob and the
angle adjustment mechanism to ensure that
they are fully engaged. If there is movement
in the tiller, check to make sure that the tiller
adjustment knob is fully tightened.
■ Seat
The seat can be turned to 45 degrees or 90 degrees.
Pull the seat adjustment lever swivel seat.
Release the lever, then continue swiveling the seat until it
locks in position.
Attention
Return the seat to the forward position before driving.
To Next Page
Loading...
Need help?
General