■ Starting and Driving
1. Make sure the seat is installed properly.
2. Make sure the tiller has been secured properly.
3. Fold down the armrests so you can rest your arms on them.
4. Turn the power switch to “ON”. If necessary, turn on the headlights.
5. Check battery indicator to see whether there is enough power for your journey. If you have any
doubt about the remaining power, please recharge the batteries before departure.
6. Set the speed dial to a position you feel safe and comfortable with.
7. Check the forward/reverse speed lever works correctly.
8. Make sure the electromagnetic brake works correctly.
Make sure it is safe around you before you drive on the street.
WARNING !
Do not set in the freewheel mode when driving on a gradient.
Always re-engage the anti-freewheel device before use. Fail to do so may result in
injury.
To protect your safety, the power will automatically cut off and electromagnetic
brake ystem will activate while you are driving down a steep gradient. This will limit
the speed to a safe level. Turn the power on again to re-start your scooter.
Maximum User Weight Limit
Refer to section entitled “MAX. USER WEIGHT” in “ 8. SPECIFICATION “.
Overloading past the weight limit may lead to damage of your scooter or cause it to
malfunction and will endanger your safety. The warranty does not cover this type of
damage.
Attention
1. Do not turn the power switch to OFF while driving as this will lead to an emergency
stop and possible risk of accident and injury.
2. Do not set to the highest speeds while driving indoors.
3. Do not adjust the speed dial while driving, a sudden change in speed may cause
danger to you and others, and may cause damage to your scooter.
4. Do not place magnetic devices near the area of the operation handle as this could
affect the safe operation of your scooter.
5. Do be careful while driving in heavy traffic or crowded areas.
6. While reversing the scooter, beware of people or objects behind you.
To Next Page
Loading...
Need help?
General