Daymak E-Bike - Bringing in your E-Bike for Service; Liability

The Vienna Electric Bicycle User’s Guide
TPS Training Bulletin
Page 26
Bringing in your E-Bike for Service
Do not attempt to service the electronic or mechanical parts of your e-bike unless you are
absolutely sure of what you are doing and have a solid understanding of electrical and
mechanical equipment.
If your e-bike is not performing properly, disconnect the circuit breaker and bring the e-bike
to your local Daymak dealer.
Do not store the e-bike without disconnecting the circuit breaker.
Liability
Daymak will not be held responsible for damage or injuries resulting
from errors resulting from improperly serviced parts.