14
Operation
Right Handlebar
1) Light Switch - ere are 3 positions for the
lights. e furthest right position leaves the
lights o . e middle position will have rear
running lights and le most position has all the
lights
2) Flasher - Press this to ick the headlights on
a n d o
3) 3 Speed Switch - Set it to position 1 for slow-
est speed but furthest range. Set it to position 3
for fastest speed and shortest range.
4) rottle - Turn this to engage the motor.
Le Handlebar
1) High Beam / Low Beam - Press this button
to angle the lights up or down.
2) Turn Signals - Press this to the le or right to
indicate turning the respective direction. Leave
it in the middle when completed your turn.
3) Horn - Press this to honk the horn
To Next Page
Loading...
