dB HS-80 - Placing the base of the Flywheel; Where do I place the base of the Flywheel?; At what height must the rotating base be turned?

HS-80
HS-80 www.micro-seiki.nl page 4
Placing the base of the Flywheel?
The base must be placed horizontal. This must be done using the three adjustable feet.
Where do I place the base of the Flywheel?
The distance to the turntable depends on the length of the string. The length of the string must be the
same as the string length used to the motor unit.
At what height must the rotating base be turned?
Look at the photos below. (In this case, the string to the Flywheel is the upper one.)