Analog Inputs:
Number of Inputs: (2) Line inputs. (1) RTA Mic input
Connectors: (2) Female XLR line inputs. XLR RTA Mic input
Type: Electronically balanced/RF filtered
Impedance: > 40k Ω
Max input line level: +20dBu
CMRR: > 45dB
RTA Mic Phantom Voltage: +15VDC
RTA Mic EIN: < -110dBu, 22Hz-22kHz, 150Ω
Analog Outputs:
Number of Outputs: 6
Connectors: Male XLR
Type: Electronically balanced,RF filtered
Impedance: 120 ohms
Max Output Level: +20dBu
A/D Performance:
Type: dbx Type IV conversion system
Dynamic Range line: 110 dB A-weighted,107 dB unweighted
Type IV dynamic range: 123 dB with transient material,A-weighted, 22kHz BW
121 dB with transient material, unweighted,22kHz BW
115 dB typical with program material, A-weighted,22kHz BW
Sample Rate: 48kHz
D/A Performance:
Dynamic Range: 112 dB A-weighted,110dB unweighted
System Performance:
Dynamic Range: 110 dB unweighted,>107dB weighted,
THD+N: 0.002% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: >110dB,120dB typical
Crosstalk input to output: >100dB
Delay: 10ms per channel (60 ms total)
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
FOR MORE INFORMATION CONTACT:
dbx Professional Products
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
customer@dbxpro.com
http://www.dbxpro.com
To Previous Page
Loading...