EasyManua.ls Logo

DCG DR2815N - Operational Safety; Maintenance and Refill Safety; Tank Overfilling Warning

DCG DR2815N
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction manual DR2815N BEL VAPOR
dcg16.it
15
requirements of the manufacturer.
7.
During operation, the tank mouth must be plugged
hermetically and safety cap should be tightened in position.
8. A socket with special earthing wire must be used.
9. In use, the machine body must not be inclined at more than
45 degrees. Or otherwise boiling water will be sprayed out
together with team.
10.
Do not direct the steam towards persons, animals or other
electrical products.
11.
Before relling water, ensure to unplug the power cord to
disconnect power supply. It is necessary to unplug the power
cord after the machine is used, before it is cleaned and while it is
repaired.
12. Do not add any rust remover, odorcounteracting agent,
alcohol and detergent into the tank, which will possibly cause
damage to the tank.
13. If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied person
in order to avoid a hazard.
14. The appliance has to be unplugged after use and before
cleaning or user maintenance of the appliance.
15. Do not use in swimming pools containing water.
16.
Liquid or steam must not be directed towards equipment
containing electrical components, such as the interior of ovens.
17.
The lling aperture must not be opened during use.
Important: never overll the tank, or otherwise the steam generation
will be affected or too high steam pressure will be caused.