This document is a user manual for an ODK L-shaped desk, providing assembly instructions, parts lists, precautions, and customer service information.

Function Description:

The ODK L-shaped desk is designed to provide a spacious and functional workspace, suitable for various uses such as gaming, office work, or study. Its L-shape allows it to fit into corners, maximizing room utility. The desk includes a monitor stand, which can be positioned on either side of the L-shape, offering flexibility for different setups. The design emphasizes stability with a steel frame and adjustable foot pads.

Important Technical Specifications:

The manual details various components and fasteners, indicating the materials and sizes used in the desk's construction.

Frame Components: The desk utilizes steel frame components (A, B, C, D, E, F, M, N, P) for structural support. These components are designed to interlock and form a sturdy base.
Desk Boards: The desk surfaces (G, H, I, K) are made of board material, likely particle board or MDF, given the warnings about over-tightening screws and potential cracking.
Monitor Stand: The monitor stand consists of board K and two frame pieces J, which attach to K.
Fasteners:
- M6X12 screws (12 pieces)
- M6X25 screws (6 pieces)
- M6X30 screws (10 pieces)
- M6X40 screws (8 pieces)
- Anti-skid pads (4 pieces)
- Adjustable foot pads (6 pieces)
- Allen wrench (1 piece)
Dimensions:
- Desk board H: 29.5 inches (length, likely for one side of the L-shape)
- Desk board I: 32.5 inches (length, likely for the other side of the L-shape)
- Frame M: 25.3 inches (length)
- Frame N: 28.3 inches (length) These dimensions suggest a substantial desk size, typical for an L-shaped configuration.

Usage Features:

L-Shaped Design: Optimizes corner space and provides a large surface area for multiple monitors, peripherals, and work items.
Reversible Monitor Stand: The monitor stand (K and J parts) can be installed on either the left or right side of the desk, offering flexibility to suit user preference and room layout. This is explicitly shown in the assembly instructions (Step 11).
Adjustable Foot Pads: The inclusion of adjustable foot pads (part 6) allows users to level the desk on uneven floors, preventing wobbling and ensuring stability.
Sturdy Construction: The steel frame components are designed for durability and stability, supporting the desk boards and ensuring a reliable workspace.
Easy Assembly: The manual provides clear, step-by-step instructions with diagrams, making the assembly process manageable, although two people are recommended for ease and safety.

Maintenance Features:

General Precautions:
- Avoid Direct Sunlight: To prevent material degradation or discoloration.
- Keep Away from Heat: To protect the desk materials from damage.
- Keep Away from Sharp Objects: To prevent scratches or damage to the desk surfaces.
- Avoid Corrosive Substances: To protect the finish and integrity of the desk materials.
Assembly-Related Maintenance (Preventive):
- Proper Fastener Tightening: Users are advised to avoid over-tightening fasteners (screws) to prevent cracking within the board material. Screws should initially be tightened to 70% and then fully tightened after all parts are aligned.
- Correct Part Orientation: The manual emphasizes paying attention to the directions of parts E and F during installation to ensure proper fit and prevent issues like screws being too short.
- Alignment of Boards: It is crucial to align boards G, H, and I completely before fully tightening screws (to 100%) to avoid gaps in the assembled table.
Troubleshooting and Customer Support:
- Missing/Defective Parts: Contact customer service within 24 hours for replacements.
- Assembly Issues: Contact customer service within 24 hours for guidance.
- Damage (Non-Human Caused): Keep the product and send photos; a solution will be provided within 48 hours.
- Board Surface Issues (Broken, Scratched, Missing Holes): Contact customer service within 24 hours.
- Misaligned Screw Holes: Tighten screws on the board by 70%, adjust alignment, then fully tighten.
- Uneven/Loose Desk Board: Loosen screws in affected areas, adjust for flatness and tightness, then re-tighten. If the problem persists, contact customer service.
- Damaged Steel Frame (Bent, Broken, Painted, Rusted): Contact customer service within 24 hours.
- Unstable Table: Check screw tightness, review manual for incorrect or missing parts, or contact customer service if the problem persists.
Warranty and Returns:
- 30-Day Return Policy: Unused merchandise can be refunded or exchanged within 30 days of purchase.
- 1-Year Warranty: Covers defects in product material and workmanship for one year under normal household conditions. Replacements are free, and shipping costs are covered.
- 24-Hour Customer Response: Customer support aims to respond within 24 hours, with video evidence recommended for efficient problem resolution.

DDK L SHAPED - Page 2

Table of Contents