10.FAQS
1.Clamp arms not working
(1) When the clamps don’t open/close as normal, it is
because the hidden pressure switch is stuck. Please
activate the hidden switch of the wireless car charger.
(2) Low temperature can shorten the battery life, which
may cause the clamps do not work properly. Please
insert the cable to connect the wireless car charger
with QC 3.0 car charger for power supply and turn on
the warm window blowing of the car, to rise the inside
temperature of your devices.
2.The suitability of car air vent
Cannot support non-intensive, circular or special-shaped
air vent.
3.The suitability of phone case
If the phone case is as the follows, it will not suitable for
this product: Too thick(
>
4mm/0.16inch) or with a bumpy,
uneven or rugged surface; comes with metal, magnet, a
ring shape bracket, metal sticker attached, credit card
etc.
To Next Page