MIOX AE Series Operators Manual
102-00085-E Page 19
Oxidant Discharge
The standard oxidant discharge connection from the AE™ Series OSG is a 3/8” hose barb fitting, which is
provided to connect directly to the oxidant tank. An optional check valve and 3-way valve (for sampling)
may be included in the plumbing from OSG to Oxidant Tank.
Do not use any valves in the mixed-oxidant or sodium hypochlorite lines other than the
three-way valve provided by MIOX Corporation. These valves have an open center
configuration that prevents the blockage of flows from the cell. Failure to use MIOX Corporation supplied
three-way valves may void the system and cell warranty.
To Next Page
Loading...