Need help?Do you have a question about the Deagostini MODEL SPACE Honda CB750 FOUR and is the answer not in the manual?
Steps to prepare the model's electronic components and battery installation.
Testing the interactive functions like headlights, instruments, brake light, and indicators.
Testing the brake light, horn, and indicators using control panel functions.
How to activate engine start and idle sounds using the buttons and kick starter.
Detailed steps for fitting the side stand and footrests to the motorcycle frame.
Steps for removing Honda badges and the steering stem holding the front fork assembly.
Instructions for reassembling the front fork and securing the fuel tank with screws.
Attaching indicators using adhesive and masking tape until the glue dries.
Securing shock absorbers by applying adhesive to the screw hole before retightening.
Replacing screws for the rear fender or repairing damaged screw holes.
Attaching screw hole covers to the front left and right indicator locations.
Steps to assemble the left pillion footrest, including rubber fitting and pivot insertion.
Securing the left pillion footrest bracket to the frame and silencer using screws.
Steps to remove the front wheel, detach the tyre, and clean it with silicone oil.
Applying a light mineral-based grease to the outer surface of the tyre.
Steps to assemble the right pillion footrest, fitting the rubber and pivot.
Securing the right pillion footrest bracket to the frame and silencer using screws.
Attaching seat hinges A and B to the seat base using type G screws.
Aligning and securing the seat base with hinges to the motorcycle frame using type T screws.
Checking the seat base movement by lifting and flattening it, adjusting screws if necessary.
General| Brand | Deagostini |
|---|---|
| Model | MODEL SPACE Honda CB750 FOUR |
| Category | Toy |
| Language | English |
To Next Page
