EasyManua.ls Logo

Decon wheel e-move - After Charging Procedures; Battery Removal and Recycling

Default Icon
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After charging
1) Remove the battery from the charger when the charging process is complete. Always store the
battery with its protective cover fitted (figure I).
2) Pull out the plug.
Recycling used batteries
Despite the fact that this type is the most environmentally adapted battery on the market, we
recommend that you hand your batteries in for recycling. Battery capacity
2. When you press the indication button (A, figure 2) on the battery, the lights indicate the battery's
capacity in 5 stages. The lights go out automatically after approximately 5 seconds.
Decon Wheel AB Tel + 46 (0) 345-408 80
Landerydsvägen Fax +46 (0) 345-408 95
314 22 Hyltebruk www.decon.se
Sweden info@decon.se

Other manuals for Decon wheel e-move