17
5 / ADJUSTING YOUR APPLIANCE
EN
The lamp is accessible:
IInnssiiddee tthhee oovveenn ((ffiigg..11))..
The bulb is located on the ceiling of your
oven’s cavity.
- Unscrew the view port counter-clockwise
(fig.2),
- Pull out the bulb.
Bulb specifications:
- 25 W
- 220-240 V
~
- 300°C
- G9.
- Replace the bulb then replace the view port
and reconnect your oven.
Tip
To unscrew the view port and the light,
use a rubber glove, which will make
disassembly easier.
Warning
Make sure the appliance is
disconnected from the power before
replacing the lamp in order to avoid the risk
of electric shock. Change the lamp only
when the appliance has cooled down.
fig.1
REPLACING THE OVEN LAMP
••
Bulb
Unscrew
View port
fig.2
Light
To Next Page
Loading...
Need help?
General
