DEEP SEA ELECTRONICS DSEGenset DSE3110 - OPERATION; QUICKSTART GUIDE; STARTING THE ENGINE

Operation
057-086 ISSUE: 6
Page 34 of 56
5 OPERATION
NOTE: The following descriptions detail the sequences followed by a module containing
the standard ‘factory configuration’. Always refer to the configuration source for the exact
sequences and timers observed by any particular module in the field.
5.1 QUICKSTART GUIDE
This section provides a quick start guide to the module’s operation.
5.1.1 STARTING THE ENGINE
NOTE: For further details, see the section entitled Operation elsewhere in this manual.
Press the Manual
/ Start button to
crank the engine.