Attach your Deeper START
carefully and securely
Before you cast out your shnder, it is very important to
ensure it is correctly attached to your line and rod. Every
time you attach your Deeper START, please be careful to
attach it correctly and check these points:
1. Is your line passing correctly through the tip top (the
last and smallest line guide on your rod)? If the line is
looped or knotted here, the line can break when casting
and you could lose your shnder.
2. Are you using good quality line that is not worn or
frayed?
3. Is the swivel clip fully and correctly closed? This is
important because your shnder could be lost if the clip
is not closed correctly.
11
To Next Page
Loading...