deeper START - Basics for shore fishing with your Deeper

Lithium Polymer, 3.7V Rechargeable, 850mAh
Power Supply input: Micro USB B type, 5V DC, 450mA max
(for charging battery)
Power Adapter Input: AC 110V/240V. Output Micro USB, 5V 450mAh
Wireless connection type: Wi-Fi
Casting Range: Up to 330ft / 100m. Range depends on the OS and smartphone model
Battery Life: Up to 6 hours
Charging Time: 2 hours
Basics for shore fishing with your Deeper
Make sure your sonar is waterproof. If you are using Deeper CHIRP or PRO models, always make sure the top
cover of your Deeper is attached properly. ‘Water’ and ‘Proof’ marks should align perfectly. To do so:
1.Put the capon the Deeper case by aligning the waterproof marks, but don't screw it just yet;
2. Carefully screwcounterclockwise till it dipsin;
3. As soon as it dips, start screwing clockwise. Close it tightly until the “water proof” marks align perfectly.

Initial connection:
1.
Put your Deeper Sonar in the water close to the shore, up to 5 meters / 16 feet from your smartphone.
2.
Go to the Wi-Fi connections (settings) of your smartphone. In the list of available Wi-Fi connections, find
your Deeper Sonar and connect to it. If it asks for a password – it’s 12345678