EasyManua.ls Logo

deeper START - LED indicator and battery issues

deeper START
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TheNight Fishingfeature should be turned on when fishing at night or in low light conditions. With the Deeper
START it can be activated immediately, whereas with the Deeper PRO, PRO+ and CHIRP models you will need to
replace the standard cover with aDeeper Night Fishing Coverfirst. Night Fishing mode activates a blinking light
that is only visible through a transparent cover.
Additional settings:
Shallow mode – available for CHIRP models only. Automatically switches the scanning beam to Narrow (7°) when
scanning shallow waters with depths below 2m / 4 ft.
Low power mode available for CHIRP models only. Enabling this will make your sonar consume less battery, but
result in slightly reduced scanning resolution and quality.
LED indicator and battery issues
If you are experiencing any issues with the charging of the device, please connect your Deeper to a charger and
check the color of the light indicator. This will show the status of the battery.
A blinking orange light means that the battery is charging, and there are no issues. It takes roughly 2 hours
to fully charge the battery from 0% to 100%
A green light means that the battery is fully charged
A blue light means that it is too cold to charge the battery. Lithium batteries cannot be charged at a
temperature below 3°C (37.4°F).
A white light means that the unit requires a firmware update.Make sure that your Deeper App is up to date,
and then pair with your Deeper via the Deeper App while the unit is being charged. The firmware update will
be initiated.
Deeper PRO/CHIRP models: A red light or no light at all means that there may be an issue with the battery or
the charging cable. Please try plugging the cable in and out for few times, as well as trying a differentmicro USB
type B cable. If the problem persists, please contactDeeper Support.
Deeper START: A rapidly blinking light or no light at all means that there may be an issue with the battery or the
charging cable. Please contact Deeper Support for further assistance.
QUICK GUIDE (PRO/PRO+)

Other manuals for deeper START