< OPERATION >
Once batteries are inserted to the helicopter and the remote
① Turn on the power switch of the helicopter, the power
indicator of the helicopter will flash quickly. Then Keep the
helicopter on level. DO NOT hold it in your hands.
② Turn on the power switch of the remote, you will hear the
“Di” sound and the power indicator of the remote will flash.
③ Push the left joystick up then down to pair with the
helicopter. You will hear the “Di” sound again, the power
indicator of the remote and the helicopter will turn soild when
they pair successful.
① Press the Take off button once, the helicopter will take off and
hover at 1 meter altitude.
② When the helicopter is flying, press the Landing button once,
the helicopter will land on the ground.
③ When the helicopter is flying, press and hold the Landing
button, the helicopter will crash.
1. Pairing
2. Take Off, Landing and Emergency Stop
Take Off
Landing and
Emergency stop
①
②
To Next Page
Loading...