deerma F628 - Product Usage; Remove Water Tank; Open Water Tank Lid; Fill Water Tank

Product Usage
2 Turn the tank over,
open the tank lid
Take out the water tank
3
4 Tighten up
Add water
the tank lid
1. Put the humidifier on the level surface, take down the water tank, turn it
over and unscrew the tank lid at the bottom of tank;
2.Inject appropriate clean tap water
3. Screw up the tank lid;
4. Stably place the water tank on the engine base, plug into the socket
Please ensure the working voltage consistent with the service voltage
before powering on.
4