Connecting Your Mythos Loudspeakers
Hooking Up Your
Mythos
Loudspeakers
Your Mythos loudspeakers each have one pair
of
gold 5-way
binding posts. Nonnally, you will hook up the left main/front channel
red(
+) tenninal
of
your receiver or amplifier to the red(+) tenninal
of
your left Mythos loudspeaker and the left main/front channel black(-)
tenninal
of
your receiver or amplifier to the black(-) tenninal
of
your
left Mythos loudspeaker. Connect the right channel main/front chan-
nel red(
+) tenninal
of
your amplifier or receiver to the red(+)
tenninal
of
your right Mythos loudspeaker and the black(-) tenninal
of
the right main/front channel
of
your receiver or amplifier to the
black(
-)
terminal
of
your right Mythos loudspeaker.
If
you are using the Mythos
as
side/rear surround speakers, hook
up the left surround red(
+) terminal
of
your receiver or amplifier
to
the red(+) tenninal
of
your Mythos left surround speaker and the left
surround black(-) tenninal
of
your receiver or amplifier to the black(-)
tenninal
of
your Mythos left surround speaker. Connect the right
surround red(
+) tenninal
of
your amplifier or receiver to the red(+)
tenninal
of
your Mythos right surround loudspeaker and the black(-)
tenninal
of
the right surround channel
of
your receiver or amplifier
to the black(-) terminal
of
your Mythos right surround loudspeaker.
If
your receiver/ decoder has a bass management system and you
are using a separate subwoofer, set bass management to "Small" left
and right main speakers, "Small" center channel, "Small" surround
speakers and "Yes" subwoofer.
If
your receiver/decoder has a choice
of
crossover frequencies, set the crossover to 80 Hz.
If
you are not
using a separate subwoofer, set bass management to "Large" left
and right main speakers, "Large" center channel and "Large"surround
speakers, and "No" subwoofer.
To Next Page
Loading...
Need help?
General
