30 / /44 EN
5
5
5
1-
2-
3-
4-
5-
6-
7-
8-
Salt indicator
On/Off Control light
Handle
On/Off/Programme Selection key
Start/Pause/Cancel key
Programme Follow-up lights
1 2 3
5678
4
Rinse Aid indicator
Operating the product
Keys
On/Off/Programme Selection key
When you use the On/Off/Programme
Selection key to select a programme, the
On Warning control light will become on,
and it will go off when you switch to the Off
position.
Start/Pause/Cancel key
It is used to startup, pause or cancel the
selected program.
Preparng the machne
1. Open the door of the dishwasher.
2. Place the dishes in accordance with the
instructions in the user manual.
3. Make sure that the upper and lower
impellers rotate freely.
4. Put adequate amount of detergent into
the detergent compartment.
5. Check if the Salt and Rinse Aid
indicators light and add salt and/or
rinse aid if needed.
6. Close the door of the dishwasher.
Programme selecton
1. Press On/Off/Programme Selection key
to switch on the product.
2. Refer to the table of "Programme data
and average consumption values"
to determine a washing programme
suitable for your dishes.
3. Use the programme selection key to
select the determined programme.
Half Load function
To Next Page
Loading...
