Need help?Do you have a question about the DEFYGRAVITY SHERCO 250-300 SE/R and is the answer not in the manual?
General| Manufacturer | Sherco |
|---|---|
| Transmission | 6-speed |
| Final Drive | Chain |
| Displacement | 249.3 cc (250) / 293.1 cc (300) |
| Bore x Stroke | 66.4 mm x 72 mm (250) / 72 mm x 72 mm (300) |
| Starting System | Electric start |
| Frame | Chromoly steel |
| Front Brake | Disc |
| Rear Brake | Disc |
| Model | DEFYGRAVITY SHERCO 250-300 SE/R |
Details on engine type, displacement, bore/stroke, fuel, cooling, starting, battery, ignition, spark plug, alternator, and oil.
Operation of the engine on/off switch and emergency stop button.
Selection of engine mapping modes using the switch.
Procedures for starting the engine (cold/hot) and shifting gears.
Essential safety guidelines including alcohol, helmet use, and machine condition.
Safety rules for refueling, parking, and critical daily pre-ride checks.
Detailed steps for servicing the motorcycle's cooling system.
Step-by-step guide for draining the motorcycle's coolant.
Step-by-step guide for filling the motorcycle's cooling system with coolant.
Setting idle speed and understanding carburetor performance based on throttle opening.
Adjusting pilot jet, air screw, needle, and main jet for optimal performance.
Procedures for checking engine oil level and draining gearbox oil.
Procedures for refilling gearbox oil and emptying the carburetor float chamber.
Detailed steps for cleaning and reinstalling the air filter.
Procedures for removing and reinstalling the motorcycle's fuel tank.
Steps for cleaning the chain and checking its tension.
Procedure for adjusting the motorcycle's chain tension.
Procedure for checking the clutch hydraulic fluid level.
Detailed procedure for removing the rear shock absorber.
Detailed procedure for reinstalling the rear shock absorber.
Procedures for removing and reinstalling the front wheel.
Procedures for removing and reinstalling the rear wheel.
Finalizing rear wheel installation and checking tire pressure.
Checking front brake lever adjustment and fluid level.
Summary of maintenance tasks for engine, carburetor, accessories, brakes, chassis, and wheels.
Major maintenance items for dealers and checks for riders, with competition notes.
Important checks and major maintenance items performed by the Sherco dealer.
To Next Page