What to do if moving parts of Deger Energie DEGERtraker 3000NT are not working properly?
If the moving parts of your Deger Energie Inverter are not working correctly, you should inspect all moving parts and re-lubricate them if needed.
How to tighten screws on Deger Energie DEGERtraker 3000NT Inverter?
Ensure all screws are tightened to the torque specified in the assembly instructions for your Deger Energie Inverter. Inspect all screws and tighten them accordingly.
General| Model | DEGERtraker 3000NT |
|---|---|
| Category | Inverter |
| Max Power Output | 3000 W |
| Dimensions | 600 x 400 x 250 mm |
| Maximum DC Input Power | 3.3 kW |
| Maximum DC Input Voltage | 600 V |
| MPPT Voltage Range | 200-500 V |
| Number of MPP Trackers | 1 |
| Maximum AC Output Power | 3.0 kVA |
| Nominal AC Output Voltage | 230 V |
| AC Output Frequency | 50/60 Hz |
| Efficiency | 96% |
| Operating Temperature Range | -25 to +60 °C |
| Cooling | Natural convection |
| Protection Degree | IP65 |
| Weight | 25 kg |
Provides an introduction to the DEGERtraker dual-axis solar tracking system.
Details essential safety precautions and warnings for operating and installing the DEGERtraker.
Presents a concise, step-by-step visual guide to the DEGERtraker assembly process.
Lists all components included in the DEGERtraker package for a complete dual-axis tracking system.
Guides the assembly of the foundation, emphasizing professional installation and soil bearing capacity.
Details the process for assembling and integrating the mast into the foundation structure.
Provides critical dimensions and specifications for the mast and foundation for different DEGERtraker models.
Instructions for assembling the east-west motor and boomerang component of the tracking system.
Details the mounting of the boomerang and the correct installation of the limit switch for axis control.
Step-by-step guide for assembling the base frame, including tension rod installation for 9000NT models.
Instructions for mounting the Elevation Motor (EMO) to both the rotation head and the base frame.
Specifies dimensions and rules for arranging solar modules on the tracking system.
Details the assembly of aluminium profiles and the subsequent mounting of solar modules.
Explains how to mount modules onto the aluminium profiles and the recommended spacing.
Provides instructions for installing the optional inverter holding plate onto the tracking system.
Guides the installation and initial setup of the DEGERtraker control unit and its components.
Technical specifications and terminal functions for the Energy Converter 6 unit.
Technical specifications and terminal functions for the Central Control Box II.
Technical specifications and terminal functions for the Central Control Box III.
Instructions for wiring the energy converter to Central Control Box II and III.
Provides a system overview diagram for the DEGERcontrolsystem components and connections.
Details on CCB operation, wind guard, sunlight sensor, and security sensor installation.
Explains how the DEGERtraker functions under various light and weather conditions.
States conformity with EC machine directives and harmonized standards for DEGERtraker systems.
Outlines the company's commitment and limitations of liability for DEGERtraker products.
Form for reporting system implementation details and commissioning status.
Provides a troubleshooting flowchart for diagnosing issues with the DEGERtraker and Energy Converter 6.
Details periodic maintenance tasks, including screw tightening and lubrication recommendations.
Form to be filled out for reporting system faults and requesting support or spare parts.
To Next Page
