EasyManua.ls Logo

Degonda-Rehab SA TwistT4 User Manual

Default Icon
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Instructions T4 2x2
English V.1.0
Headquarters Branch Office : Production :
DEGONDA-REHAB SA DEGONDA-REHAB SA DEGONDA-REHAB SA
Av. Du Rond-Point 8 2, ch. Louis-Hubert Aarestrasse 59
CH-1006 Lausanne CH-1213 Petit-Lancy CH-3661 Uetendorf
Tel. ++41 (0)21 613 81 00 Tel. ++41 (0)22 792 60 11 Tel. ++41 (0)33 345 83 00
Fax ++41 (0)21 613 81 10 Fax ++41 (0)22 792 61 26 Fax ++41 (0)33 345 83 00

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Degonda-Rehab SA TwistT4 and is the answer not in the manual?

Degonda-Rehab SA TwistT4 Specifications

General IconGeneral
BrandDegonda-Rehab SA
ModelTwistT4
CategoryWheelchair
LanguageEnglish

Summary

Introduction

Important Symbols in the Instructions

General Information Symbol

Identifies general information and special functions.

General Hazard Warning

Warns against general hazards, advises following instructions.

Chemical Burns Hazard Warning

Warns against chemical burns, advises following instructions.

Requirement Symbol

Identifies general information simplifying handling and special functions.

Important Symbols on the Vehicle

Transport Attachment Points

Informs of attachment points for transport purposes.

Pinching Hazard Warning

Warns of risk of pinching body parts or trapping clothing.

Non-Lifting Symbol

Indicates components must not be used to lift the wheelchair.

Drive Motor Release Symbols

Give information about lever position on drive motors.

Certified Safety Information

Points out neutral inspection body TÜV SÜD.

Safety Advice

General Safety Advice

Use wheelchair according to instructions; observe safety advice.

Safety Advice about Care and Maintenance

Risks of inadequate maintenance threaten guarantee and safety.

Safety Advice about Electromagnetic Compatibility

Electromagnetic Radiation Risks

Avoid strong transmitters; check modifications for interference.

Safety Advice about Driving Mode / Pushing Mode

Tipping Over Risk

Drive on inclines and slopes safely; avoid obstacles at angles.

The Most Important Parts

Getting On and Off

Side Section Removal & Fitting (Standard Seat)

Instructions for removing and fitting standard seat side sections.

Side Section Removal & Fitting (Bio Seat)

Instructions for removing and fitting Bio seat side sections.

Driving

Before the First Journey

Familiarize with operation and elements before the first journey.

Overcoming Obstacles

Instructions for safely navigating obstacles.

Inclines and Downhill Slopes

Safe Operation on Inclines

Drive downhill at 2/3 speed; avoid abrupt maneuvers.

Parking and Standstill

Parking Procedure

Switch off power supply when parking for a long time.

Pushing Mode

Disengaging the Motors

Steps to disengage motors for manual pushing.

The R-Net Control Panel

Control Panel Overview and Functions

Identifies controls, buttons, and indicators on the panel.

Activating Electrical Setting Modes

How to Change Settings

How to change settings and modes via the control panel.

Vehicle Immobilizer Operation

Activating and Deactivating

How to activate and deactivate the vehicle immobilizer.

Driving Profile Selection

Selecting Driving Profiles

How to select different driving profiles.

Fault Diagnosis

Initial Troubleshooting Steps

Checks for OFF or BLINKING status indicators.

Fault Codes and Diagnosis

Interpreting Fault Signals

Interpreting fault signals and corresponding actions.

R-NET Control Panel Color Display

Control Panel Overview

Identifies elements and indicators on the color display.

Setting Modes and Drive Profiles (Color Display)

Activating Setting Modes

How to activate setting modes on the color display.

Selecting Drive Modes

How to select drive modes on the color display.

Adjusting Driving Speed (Color Display)

Speed Reduction/Increase

How to reduce or increase driving speed using profile buttons.

Setting Mode (Color Display)

Navigating Setting Menus

How to access and adjust settings like time and brightness.

Adapting the Wheelchair to User Posture

Control Panel Adjustment

Adjusting panel for arm length and armrest height.

Armrest Height Adjustment

Standard Seat Height

Setting armrest height for standard seat.

Bioseat Height

Setting armrest height for Bioseat.

Side Section Width Adjustment (Standard Seat)

Width Setting Procedure

Procedure to set the width of side sections for standard seat.

Side Section Width Adjustment (Bioseat)

Width Setting Procedure

Procedure to set the width of side sections for Bioseat.

Backrest Adjustment

Setting Backrest Angle

Setting the backrest angle using a lever.

Setting Foot and Leg Supports

Standard Leg Supports: Length Setting

Setting the length of standard leg supports.

Electrically Adjustable Leg Supports: Length Setting

Length Setting Procedure

Procedure to set the length of electric leg supports.

Calf Supports: Height Setting

Height Setting Procedure

Procedure to set the height of calf supports.

Calf Supports: Horizontal and Angle Setting

Depth and Angle Adjustment

Manually setting the depth and angle of calf supports.

Central Electrical Leg Support Adjustments

Leg Support Length Adjustment

Setting the length of the central electrical leg support.

Calf Support Sideways Adjustment

Adjusting calf supports sideways using a spanner.

Calf Support Height and Angle Adjustment (Central Electrical)

Height and Angle Setting

Setting height and angle of calf supports with Allen key.

Electrics

Protection of the Drive Electronics

Overload and overheating protection for drive electronics.

The Main Fuse

Main Fuse Replacement Procedure

Steps to replace the main fuse behind the electronics cover.

Batteries and Charging

Gel Battery Information

Facts about gel batteries, maintenance, and initial charging.

Battery Charging Procedure

Instructions and warnings for charging the vehicle's batteries.

Battery Charger Fault Indicators

Interpreting Fault Codes

Interpreting fault codes and warning lights on the battery charger.

Changing the Batteries

Battery Handling Safety Precautions

Warnings for personal injury, fire risk, and acid burns during battery work.

Battery Removal Procedure

Steps for Battery Removal

Step-by-step instructions for removing the wheelchair batteries.

Connecting New Batteries

Procedure for Connecting Batteries

Steps to connect new batteries correctly after replacement.

Care and Maintenance

Annual Vehicle Check

Importance of yearly checks by a specialist dealer for safety.

Cleaning the Vehicle

Guidelines for safely cleaning the wheelchair.

Transport

Loading the Wheelchair

Instructions for loading the wheelchair into a transport vehicle.

Securing the Wheelchair for Transport

How to anchor the wheelchair securely in a transport vehicle.

Disposal

Product Disposal

Information on returning worn-out wheelchairs for disposal.

Battery and Electronic Component Disposal

Environmentally friendly disposal of batteries and electronics.

Warranty / Guarantee

Warranty Conditions

Preconditions for warranty claims and excluded damages.

Non-compliance Warning

Consequences of not following instructions or improper maintenance.

Technical Data