Inputs 87 and 88 are configurable in AGC 244.
The placement of terminals (top, bottom, left, right) is seen from the rear side of the unit.
Input/output lists
In the I/O lists below, the following terms will be used in connection with the relay outputs:
NO means Normally Open
NC means Normally Closed
Com. means common terminal
Plug #1, power supply
Term. Function Technical data Description
1 +12/24 V DC 12/24 V DC +/-30 % Power supply
2 0 V DC
3 Not used
AGC 200 installation instructions
4189340610 UK
Hardware
DEIF A/S Page 29 of 67
To Next Page
Loading...
