EasyManua.ls Logo

Deif AGC 200 - Page 64

Deif AGC 200
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Relay outputs,
electrical rating
Relays 16 to 20 and 28 to 43: 250 V AC/30 V DC 8 A
UL/cUL Listed: 250 V AC/30 V DC 6 A General use B300 Pilot duty
Relay 23: 36 V DC 8 A
UL/cUL Listed: 24 V DC 8 A General use
Relay 26 and 27: 36 V DC 16 A
UL/cUL Listed: 24 V DC 16 A General use
Galvanic sepa-
ration
AGC 222, 232
AGC 242, 243
AGC 244
AGC 245, 246
AGC 212, 213
Between AC voltage and other I/Os: 3250 V AC, 50 Hz, 1 minute
Between AC current and other I/Os: 2200 V AC, 50 Hz, 1 minute
Between relay outputs and other I/Os: 2200 V AC, 50 Hz, 1 minute
Between aux. supply and other I/Os: 550 V AC, 50 Hz, 1 minute.
Between binary input groups and other I/Os: 550 V AC, 50 Hz, 1 minute
Between analogue input groups and other I/Os: 550 V AC, 50 Hz, 1 minute
The same as above, but with no galvanic separation on analogue input groups
Mounting Panel-mounted
Front size 312 × 219 mm (122.8 × 86.2 in)
Panel cutout 297 × 204 mm (11.69 × 8.03 in)
Tolerance: +0.4/-0 mm
Display 240 × 128 pixel backlight STN
Safety To EN 61010-1, installation category (over-voltage category) III, 600 V, pollution degree
2
To UL508 and CSA22.2 No. 14-05 Installation category (over-voltage category) III, 600
V, pollution degree 2
Protection Front: IP52/NEMA type 1 (IP66/NEMA type 1 with gasket, option L1)
Terminals: IP20/NEMA type 1 To IEC/EN 60529
EMC/CE To EN 61000-6-1/2/3/4
IEC 60255-26
IEC 60533 power distr. zone
IACS UR E10 power distr. zone
Vibration 3 to 13.2 Hz: 2 mm
pp
. 13.2 to 100 Hz: 0.7 g. To IEC 60068-2-6 and IACS UR E10
10 to 60 Hz: 0.15mm
pp
. 60 to 150 Hz: 1 g. To IEC 60255-21-1 Response (class 2)
10 to 150 Hz: 2 g. To IEC 60255-21-1 Endurance (class 2)
Shock 10 g, 11 ms, half sine. To IEC 60255-21-2 Response (class 2)
30 g, 11 ms, half sine. To IEC 60255-21-2 Endurance (class 2)
50 g, 11 ms, half sine. To IEC 60068-2-27
Bump 20 g, 16 ms, half sine. To IEC 60255-21-2 (class 2)
Material All plastic materials are self-extinguishing according to UL94 (V1)
AGC 200 installation instructions
4189340610 UK
Technical information
DEIF A/S Page 64 of 67

Table of Contents

Other manuals for Deif AGC 200

Related product manuals