Deif SGC 120 - Engine Drive; Automatic Mains Failure (AMF)

4.2.2 Engine drive
You can use the SGC to control one engine. The controller has all the necessary functions to control and protect an engine.
To use the controller to control an engine drive, go to Generator > Alternator Configuration in the smart connect
software. Set Alternator Present as No.
ECU
GOV
CAN bus
4.2.3
Automatic mains failure (AMF)
G
NOTE You can place the CT on the line from the genset or on the load side.
The AMF function is active when:
• Auto exercise is not enabled.
User manual 4189341340A EN
Page 42 of 76