Corrective Action: Use supported features.
Failure to install ESXi on RAID 1
Issue: Attempting to install ESXi on a RAID 1 results in an invalid partition table error.
Probable Cause: If an uncongured physical disk containing an ESXi partition is used in a virtual disk, any attempts to install a
partition of ESXi on this virtual disk will raise an error due to failure to clear out the previous partition.
Corrective Action: Delete the existing RAID 1, run erase physical disk on both drives, re-create the RAID 1 with Quick
initialization ON, then attempt to reinstall ESXi on the virtual disk.
Troubleshooting 27
To Next Page
Loading...
