Dell EMC BOSS-S1 - 1 Overview

Overview
BOSS-S1 is a simple RAID solution card designed specically for booting a server's operating system. The card supports up to two 6 Gbps
M.2 SATA drives. The BOSS-S1 adapter card has a x8 connector using PCIe gen 2.0 x2 lanes, available only in the low-prole and half-
height form factor. The BOSS-S1 modular card has a dedicated slot in modular servers.
NOTE: There are no status LEDs on the BOSS-S1 card.
Figure 1. Features of adapter BOSS-S1 card
1
SATA drive connector (2) 2 80 mm M.2 SATA drive 1
3 80 mm M.2 SATA drive 2
Figure 2. Features of BOSS-S1 modular card
1
modular BOSS-S1 card 2 SATA drive connector
3 80 mm M.2 SATA drive
Topics:
1
Overview 5