eMMC Storage module
For computers with eMMC module in M.2 2230 SSD slot.
Removing the eMMC storage module
Prerequisites
1. Follow the procedure in before working inside your device.
2. Remove the cover.
About this task
The figure indicates the location of the eMMC storage module and provides a visual representation of the removal procedure.
Steps
1. Remove the (M2x3.5) screw that secures the eMMC storage module to the connector on the system board.
2. Slide the eMMC storage module at an angle out from the slot.
Installing the eMMC storage module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the eMMC storage module and provides a visual representation of the installation procedure.
30
Removing and installing components
To Next Page
Loading...
