Table 4. System setup options—Boot Configuration menu (continued)
Boot Configuration
By default, the option is not enabled.
Secure Boot Mode Enable or disable to change the secure boot mode options.
By default, the Deployed Mode is enabled.
Expert Key Management
Enable Custom Mode Enable or disable custom mode.
By default, the custom mode option is not enabled.
Custom Mode Key Management Select the custom values for expert key management.
Table 5. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, the option is enabled.
USB/Thunderbolt Configuration
● Enable or disable booting from USB mass storage devices that are
connected to external USB ports.
By default, the Enable Rear USB Ports and Enable Side USB Ports
options are enabled.
● Enable or disable booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, the Enable USB Boot Support option is enabled.
Side USB Configuration Enable or disable the individual USB ports.
By default, the Side Port 1(Near DP and Side Port 2 options are selected.
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of this settings.
Rear USB Configuration Enable or disable the individual USB ports.
By default, all the options (Rear Port 1(UP), Rear Port 2(Down) and Rear
Port 3(Type C))are selected.
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of this settings.
Table 6. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
Storage interface
Port Enablement This page allows you to enable the onboard drives.
By default, all the options are enabled.
SMART Reporting
System setup 49
To Next Page
Loading...
