Table 6. System setup options—Storage menu (continued)
Storage
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Drive Information
SATA-1
Type Displays the SATA type information of the system.
Device Displays the SATA device information of the system.
M.2 PCIe SSD
Type Displays the M.2 PCIe SSD type information of the system.
Device Displays the M.2 PCIe SSD device information of the system.
PCIe M.2 eMMC
Type Displays the PCIe M.2 eMMC type information of the system.
Device Displays the PCIe M.2 eMMC device information of the system.
Table 7. System setup options—Display menu
Display
Primary Display
Video Primary Display This field determines which video controller will become the primary display
when multiple controllers are available in the system.
By default, Auto option is enabled.
Full Screen Logo Enable or disable full screen logo.
By default, the option is not enabled.
Table 8. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC If enabled, UEFI networking protocols are installed and available, allowing pre-
OS and early OS networking features to use any enabled NIC's. This may be
used without PXE turned on.
By default, Enabled with PXE option is enabled.
Wireless Device Enable
WLAN Enable or disable the internal WLAN device
By default, the option enabled.
Bluetooth Enable or disable the internal Bluetooth device
By default, the option enabled.
Enable UEFI Network Stack Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.
HTTPs Boot Feature
HTTPs Boot Enable or disable the HTTPs Boot feature.
By default, the HTTPs Boot option is enabled.
50 System setup
To Next Page
Loading...
