Dell EMC DP4400 - Page 15

Figure 10 Putty Configuration screen for DataProtection-ACM
6. At the login as prompt, type root.
7. At the Password prompt, type the password for the root user.
The default password for the root user is Idpa_1234.
8. Determine the DataProtection-ACM version by typing the following command:
rpm -qa | grep dataprotection
Ensure that the DataProtection-ACM version is earlier than
dataprotection-2.0.0-571095.x86_64 .
9. Change to the directory that contains the pre-installation patch file by typing the following
command:
cd /tmp/patch
10. Extract the contents of the .tar.gz file by typing the following command:
tar -xvf Idpa_pre_update_N.N.N.nnnnnn.tar.gz
The contents are extracted to a subdirectory named Idpa_pre_update_N.N.N.nnnnnn.
11. Change directory to Idpa_pre_update_N.N.N.nnnnnn.tar.gz directory by typing the
following command:
cd /tmp/patch/Idpa_pre_update_N.N.N.nnnnnn/
12. Change permission of install.sh file by typing the following command:
chmod +x install.sh
Dell EMC Integrated Data Protection Appliance DP4400 2.3 Installation Guide
15