Table 1 IP address range assignments (continued)
IP Range
Allocation
Component Description Sample Hostname
+5 Avamar Avamar Proxy VM idpa-
avproxy.domain.local
+6 IDPA System Manager IDPA System Manager
VM
idpa-sysmgr.domain.local
+7 Data Protection Advisor Application Server Host
VM
idpa-dpa1.domain.local
+8 Data Protection Advisor Datastore Server Host
VM
idpa-dpa2.domain.local
+9 Data Protection Search Index Master Node Host
VM
idpa-search.domain.local
+10 DD Cloud DR CDRA
(optional)
Data Domain Cloud
Disaster Recovery (DD
Cloud DR) Cloud DR
Add-on (CDRA) virtual
appliance
idpa-cdra.domain.local
The following three IP addresses are required for additional connectivity, but are not configured as
a part of the range.
Table 2
Additional IP addresses
Component Description Sample Hostname
ESXi VMware ESXi idpa-esxi.domain.local
Appliance Configuration
Manager (ACM)
ACM VM idpa-acm.domain.local
iDRAC Integrated Dell Remote
Access Controller
idpa-idrac.domain.local
Install Network Validation Tool
The Network Validation Tool (NVT) for IDPA runs multiple automated tests to validate the network
configuration. You must run the NVT for IDPA from a system on the management network.
Before you install IDPA, network configuration must be completed for the datacenter. After the
network configuration is complete, you must install and run the Network Validation Tool to validate
the network configuration for a successful deployment of IDPA in the datacenter. To download the
NVT, and for more information about NVT, see https://help.psapps.emc.com/display/HELP/
Network+Validation+Tool+for+IDPA.
Install the rails
About this task
The rails are labeled left and right, and cannot be interchanged. The front side of each rail is
labeled Left Front or Right Front when the rail faces the cabinet front.
Dell EMC Integrated Data Protection Appliance DP4400 2.3 Installation Guide
5
To Next Page
Loading...
