Figure 9 WinSCP session configuration window
3. Create a temporary folder /tmp/patch.
4. Copy the Idpa_pre_update_N.N.N.nnnnnn.tar.gz file to the /tmp/patch
directory.
5. Determine the DataProtection-ACM version by typing the following command:
rpm -qa | grep dataprotection
Ensure that the DataProtection-ACM version is earlier than
dataprotection-2.0.0-571095.x86_64
.
6. Change to the directory that contains the pre-installation patch file by typing the following
command:
cd /tmp/patch
7. Extract the contents of the .tar.gz file by typing the following command:
tar -xvf Idpa_pre_update_N.N.N.nnnnnn.tar.gz
The contents are extracted to a subdirectory named Idpa_pre_update_N.N.N.nnnnnn.
8. Change directory to Idpa_pre_update_N.N.N.nnnnnn.tar.gz directory by typing the
following command:
cd /tmp/patch/Idpa_pre_update_N.N.N.nnnnnn/
9. Change permission of install.sh file by typing the following command:
chmod +x install.sh
10. Run the installation script file by typing the following command:
./install.sh
Messages be displayed on the screen during the installation process. The following message
might be displayed, which you can ignore:
“warning: file /usr/local/dataprotection/var/configmgr/server_data/
config/InfrastructureComponents_Template.xml: remove failed: No
such file or directory”
Hardware Installation Guide
14 Dell EMC Integrated Data Protection Appliance DP4400 2.4 Hardware Installation Guide
To Next Page
Loading...
