Dell EMC H745P MX - Related Documentation

To Next Page

To Previous Page

• Human Interface Infrastructure (HII) Conguration Utility

• PERC CLI

NOTE: The BIOS conguration utility <Ctrl> <R> is not supported on the PERC 10 cards.

Comprehensive embedded management

Comprehensive Embedded Management (CEM) is a storage management solution for Dell systems that enables you to eectively monitor

the RAID and network controllers installed on the system using iDRAC without an OS installed on the system.

Using CEM enables you to perform the following:

• Monitor devices without an OS installed on the system.

• Provide a specic location to access monitored data of the storage devices and network cards.

• Allows controller conguration for all the PERC 10 cards (H740P and H840).

NOTE: If you boot the system to HII (F2) or Lifecycle Controller (F10), then you cannot view the PERC cards on the CEM GUI.

The PERC cards are displayed on the CEM GUI only after the system boot is complete.

Dell OpenManage Storage Management

The Dell OpenManage Storage Management is a storage management application for Dell systems that provides enhanced features for

conguring a system's locally-attached RAID disk storage. The Dell OpenManage storage management application enables you to perform

controller and enclosure functions for all supported RAID controllers and enclosures from a single graphical or command-line interface. The

graphical user interface (GUI) is wizard-driven with features for novice and advanced users, and detailed online help. Using the Dell

OpenManage storage management application, you can protect your data by conguring data-redundancy, assigning hot spares, or

rebuilding failed physical disks. The command line interface available on selected operating systems to perform RAID management tasks is

fully featured and scriptable.

NOTE

: For more information, see the

Dell OpenManage Storage Management User's Guide

at Dell.com/openmanagemanuals.

Related product manuals