Dell EMC H745P MX - Viewing Physical Disks Associated with a Virtual Disk

Option Description
• Fast Initialization
• Slow Initialization
• Secure Virtual Disk
NOTE: The Secure Virtual Disk option is only supported on SED physical disks. The security key must be
congured to enable the feature.
• Break Mirror
• Expand Virtual Disk
• Consistency Check
Name Indicates the name of the virtual disk.
Status Property Indicates the status of the virtual disk. The possible options are:
• Optimal
• Degraded
• Oine
• Failed
RAID level Indicates the RAID level of the virtual disk.
Size Indicates the size of the virtual disk.
4 Click Advanced....
You can view the following additional properties of the virtual disk:
Table 9. Advanced properties of the virtual disk
Option Description
Logical Sector Size Indicates the logical sector size of this virtual disk.
Strip Element Size Indicates the strip element size for the virtual disk.
Status Indicates the status of the virtual disk.
Secured Indicates whether the virtual disk is secured or not.
Bad Blocks Indicates whether the virtual disk has corrupted blocks.
Viewing physical disks associated with a virtual disk
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Virtual Disk Management.
All the virtual disks associated with the RAID controller are displayed.
3 Click on a virtual disk.
The properties of the virtual disk are displayed.
4 Click View Associated Physical Disks.
All the physical disks that are associated with the virtual disk are displayed.
5 From the Associated Physical Disks section, select the physical disk.
6 Click View Physical Disk Properties to view the physical disk properties.
HII
conguration utility 53