Dell EMC H745P MX - Performing Break Mirror Operation; Performing Expand Virtual Disk Operation; Performing Consistency Check

NOTE: The Physical Disk Power Management feature is not applicable to FastPath-capable virtual disks.
Performing break mirror operation
The RAID 1 virtual disk to be split must be in an optimal state, and it cannot be running any other background tasks.
To use the Break Mirror feature from the HII Conguration Utility, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2
Click Main Menu > Virtual Disk Management.
The list of virtual disks is displayed.
3 Select the RAID 1 virtual disk.
NOTE: The Break Mirror operation can be performed only on RAID 1 virtual disks.
4 From the Operations drop-down menu, select Break Mirror.
5 Click Go.
A screen is displayed asking if you are sure you want to perform the operation.
6 Select the Conrm option.
7 Click Yes.
The break mirror operation is completed successfully.
Performing expand virtual disk operation
To enable expand virtual disk feature from the HII Conguration Utility, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Virtual Disk Management.
The list of virtual disks is displayed.
3 Select the virtual disk.
4 From the Operations drop-down menu, select Expand Virtual Disk.
NOTE
: You can view the Expand Virtual Disk feature only if there is free space available in the associated disk group.
5 Click Go.
6 To expand virtual disk, enter the percentage of available capacity, and then click Ok.
A screen is displayed asking if you are sure you want to perform the operation.
7 Select the Conrm option.
8 Click Yes.
The expand virtual disk operation is completed successfully.
Performing consistency check
To enable consistency check from the HII Conguration Utility, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Virtual Disk Management.
The list of virtual disks is displayed.
3 Select the virtual disk.
HII
conguration utility 55