Dell EMC H745P MX - Hardware Components; Viewing Battery Properties; Viewing Physical Disks Associated with an Enclosure

The dedicated hot spare disk is created successfully.
Hardware components
Viewing battery properties
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Hardware Components > Battery Management.
The battery and capacity information are displayed.
3 You can view the following properties of the battery:
Field Description
Type Displays the type of battery available.
Status Displays the current status of the battery.
Temperature Displays the current temperature of the battery and also indicates whether the temperature is Normal or High.
Charge Displays the available charge of the battery in percentage.
4 DisplaysClick Advanced....
The additional advanced properties of the physical battery are displayed.
5 You can view the following advanced properties of the battery:
Field Description
Status Displays whether the current status of the battery is Learning, Degraded, or Failed.
Voltage Displays whether the voltage status of the battery is normal or high.
Current Displays power consumption of the battery in milliamps (mA).
Full Capacity Displays the maximum charge capacity of the battery.
Remaining Capacity Displays the current charge capacity of the battery.
Expected Margin of Error Displays expected margin of error.
Completed Discharge
Cycles
Displays the completed discharge cycles.
Learn Mode Displays the condition of the battery. The learn cycle is a periodic operation that calculates the charge
that is remaining in the battery to ensure there is sucient energy.
Viewing physical disks associated with an enclosure
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Hardware Components > Enclosure Management.
3 From the Select Enclosure eld, choose the enclosure for which you need to view the physical disks.
All the physical disks that are associated with the virtual disk are displayed.
4 Click the Attached Physical Disks drop-down box.
All the physical disks that are associated with the selected enclosure are displayed.
60
HII conguration utility