Dell EMC H745P MX - Creating Secured Virtual Disk; Securing Pre-Existing Virtual Disk; Importing Secure Virtual Disk

3 Select the Conrm option.
4 Click Yes.
The security key is disabled successfully.
Creating secured virtual disk
To create a secured virtual disk, the controller must have a security key established rst. See Creating security key.
NOTE: Combining SAS and SATA hard drives within a virtual disk is not supported. Also, combining hard drives and Solid-State
Drives (SSDs) within a virtual disk is not supported.
After the security key is established, perform the following steps:
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Conguration Management > Create Virtual Disk.
For more information, see Creating the virtual disks.
3 Select the Secure Virtual Disk option.
4 Click Create Virtual Disk.
The secure virtual disk is created successfully.
Securing pre-existing virtual disk
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Virtual Disk Management.
The list of virtual disks is displayed.
3 Select a virtual disk.
4 From the Operations drop-down menu, select Secure Virtual Disk.
NOTE
: The virtual disks can be secured only when the virtual disks are in Optimal state.
Importing secure virtual disk
NOTE
: The controller must have an existing security key before importing secured foreign virtual disk.
1 Enter the Dell PERC 10 Conguration Utility. See Navigating to Dell PERC 10 conguration utility.
2 Click Main Menu > Conguration Management > Manage Foreign Congurations > Preview Foreign Congurations.
3 Click Import Foreign Conguration.
A screen is displayed asking if you are sure you want to perform the operation.
4 Enter Passphrase if importing virtual disk with a dierent passphrase.
5 Select the Conrm option.
6 Click Yes.
The foreign conguration is imported successfully.
Security key and RAID management
63