Install Network Validation Tool
The Network Validation Tool (NVT) runs multiple tests to validate the network
configuration. You need to run the NVT from a system on the management network.
Before you install IDPA, it is recommended that you run the Network Validation Tool
to validate the network settings for a successful deployment of IDPA in the
datacenter. You must review the network configuration before starting the IDPA
installation. To download the NVT and for more information about the tool, see
https://help.psapps.emc.com/display/HELP/Network+Validation+Tool+for+IDPA.
Introduction
10 Dell EMC Integrated Data Protection Appliance 2.4 Getting Started Guide
To Next Page
Loading...
