Virtualization panel
The Virtualization panel displays information about the internal virtual environment on
the appliance, including the IP address and version of the vCenter server and ESXi
host.
Customer Information and General Settings panels
The Customer Information panel displays the administrator contact and site
information. To view the full information of an item, hover over the item.
Hover over the gear icon on the Customer Information panel and click on Enable
remote support to configure ESRS for the IDPA Appliance.
The General Settings panel displays basic settings including time and network
configuration. To view the full information of an item, hover over the item.
User accounts for components
The IDPA configuration uses the user accounts in Table 5 on page 31. By default,
these accounts use the common IDPA password .
The LDAP references in the below table apply to IDPA System Manager and Search
components only. The appliance and other components do not use LDAP.
For information about how to change component passwords, see Change passwords
and synchronize components on page 32.
Table 5
Component and user account mapping
Component Username Password
ACM root Common password provided during IDPA
Appliance configuration.
IDPA System Manager (If
external LDAP is not
configured)
idpauser Common password provided during IDPA
Appliance configuration.
IDPA System Manager (If
external LDAP is
configured)
Respective LDAP
credentials
External LDAP password as applicable.
Avamar admin Common password provided during the
IDPA Appliance configuration
Data Domain sysadmin Common password provided during the
IDPA Appliance configuration.
Data Protection Advisor administrator Common password provided during IDPA
Appliance configuration.
Search Respective LDAP
credentials. If external
LDAP is not configured,
then idpauser
Common password provided during IDPA
Appliance configuration.
About the ACM dashboard
Virtualization panel 31