2. Replace a 3.5 inch hard drive:
a. Remove the hard drive from the carrier.
b. Install the hard drive into the carrier.
3. Install the hard drive carrier into the mid hard drive tray.
Remove 3.5 inch hard drive from the hard drive carrier
Before you begin
Follow all safety guidelines.
To maintain proper system cooling, all empty hard drive slots must have hard
drive blanks installed.
Procedure
1. Push out at the edges of the carrier to disengage the tabs on the hard drive
carrier from the slots on the hard drive.
2. Lift the hard drive carrier away from the hard drive.
Figure 14 Removing 3.5 inch hard drive from the hard drive carrier
Install hard drive carrier into mid hard drive tray
Before you begin
Follow all safety guidelines.
Remove and replace assemblies
Replace a hard drive in the mid hard drive tray 27
To Next Page
Loading...
