Remove the system cover
Before you begin
1. Follow all safety guidelines.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
Procedure
1. Using a flat or a Phillips head screwdriver, rotate the latch release lock counter
clockwise to the unlocked position.
2. Lift the latch till the system cover slides back and the tabs on the system cover
disengage from the guide slots on the system.
3. Hold the cover on both sides, and lift the cover away from the system.
Figure 42 Remove the system cover
Remove and replace assemblies
Remove the system cover 59
To Next Page
Loading...
