Dell EMC Inspiron 3493 - Power-Button Board

Post-requisites
1. Replace the fan.
2. Replace the wireless card.
3. Replace the base cover.
Power-button board
Removing the power-button board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the fan.
5. Remove the hard drive.
6. Remove the display assembly.
Removing and installing components
47