Dell EMC Inspiron 3493 - Display Hinges

Post-requisites
1. Replace the display bezel.
2. Replace the display assembly.
3. Replace the fan.
4. Replace the wireless card.
5. Replace the base cover.
Display hinges
Removing the display hinges
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the wireless card.
3. Remove the display assembly.
4. Remove the display bezel.
Procedure
1. Peel the tape that secures the display cable to the display hinge.
68
Removing and installing components