Post-requisites
1. Replace the display hinges.
2. Replace the display panel.
3. Replace the camera.
4. Replace the display bezel.
5. Replace the display assembly.
6. Replace the fan.
7. Replace the wireless card.
8. Replace the base cover.
Display back-cover and antenna assembly
Removing the display back-cover and antenna assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the wireless card.
3. Remove the fan.
4. Remove the display assembly.
72
Removing and installing components